Structures · Portfolio project 06

Doors & Bulkheads Kit

Modular Industrial Doors, Shutters, Bulkheads & Hatches

Cut a standard opening, drop in a door. Swap it for a bulkhead, a frame or a welded plate — they all fit the same hole.

Assets
23 · 9 functional types
Formats
GLB · FBX · .blend · Unity 6
Tested in
Unity 6000.6 (Built-in, URP) · Blender 5.0
Version
1.0.0 · 80 release checks passed

Blender renders of the kit's demo layouts. Walls, floors and plain context blocks in the images are scene dressing for the demos.

What was built

A modular kit of industrial doors that fit standard wall and floor openings: single and double steel doors, a sliding door, roller shutter and grille, watertight and blast bulkhead doors, floor hatch and scuttle, empty frames, an infill plate, door-side fixtures and guards — every leaf and curtain a separate part with its pivot set, PBR materials and game-ready exports.

Where it is useful

Interchangeable openings for corridors, ships, bunkers and loading bays: doors, shutters, bulkheads and hatches on one opening standard.

Demo layouts

Three demo scenes — a service corridor (single, solid, mesh and double doors, an empty frame, a cased double opening and a welded infill side by side), a loading bay (roller shutter, roller grille, an open vehicle frame, a sliding door and a panic exit door with bollards, corner guards, a control station, a beacon and a reader) and a bulkhead deck (watertight and blast bulkhead doors, an empty bulkhead frame, a floor hatch and a round scuttle) — are included as a Blender file and as placement lists (Blender and Unity transforms) and as Unity scenes with simple wall blocks. The walls and floors in the images are demo context and are not included.

Opening standard

  • Five rectangular rough openings: P1 1.1 × 2.2 m (single doors, bulkheads), P2 2.0 × 2.2 m (double and sliding doors), V1 3.2 × 3.2 m (shutters, vehicle frame) in a 0.2 m wall, and H1 1.0 m / H2 0.8 m square floor openings.
  • Every unit's origin is the bottom centre of its opening on the wall's front face, and nothing reaches into the wall around the opening: cut the hole, place the unit, done. Any unit of a code fits any opening of that code.
  • Leaves, lids and curtains are separate child meshes with the pivot on the hinge or track, ready to rotate, slide or retract in your engine; their colliders move with them. Hinged parts open 90°, the sliding leaf 2.05 m, shutter curtains retract into the housing by scaling.
  • Openings, clear passages and moving parts are listed in asset_manifest.json and in OpeningStandard.md.
  • Every unit was checked: it stays inside its opening, its lining meets the opening faces, every part moves through its full range without touching the frame, the wall or the floor, and the clear passage is free when open.

Contents

What's in the kit (23 assets, 9 functional types)

  • Door ASingle steel door in a rebated steel frame: vision panel, lever handles both sides, kick plates, three hinges. Leaf opens 90° to the front.
  • Door PanicSingle steel exit door: push bar on the back face, pull handle on the front, green 'PUSH TO OPEN' sign.
  • Door SolidSingle plain steel door with deadlock and yellow 'KEEP SHUT' sign — stores and plant rooms.
  • Door MeshWelded-mesh cage door in a steel frame: see-through leaf with a mid rail, hasp and padlock.
  • DoubleDoor ADouble steel doors (two 0.9 m leaves) with vision panels and lever handles; each leaf opens 90° to the front.
  • DoubleDoor PanicDouble steel exit doors with push bars on the back faces and pull handles on the front.
  • SlidingDoor ATop-hung sliding steel door: leaf on two wheeled hangers in a face-mounted track, floor guide, pull handle. Slides 2.05 m to the right.
  • RollerShutter ARoller shutter for a 3.2 m vehicle opening: slatted steel curtain in face-mounted guides, housing with 'DOCK 05' sign and bottom rail.
  • RollerShutter GrilleSecurity roller grille for the same 3.2 m opening: open bar-and-link curtain you can see through.
  • Bulkhead WatertightShip-style bulkhead door with rounded corners: raised coaming (0.2 m sill), six dogs, centre handwheel, gasket, two heavy hinges, 'D-02' plate.
  • Bulkhead BlastHeavy blast-style bulkhead door: 120 mm leaf with stiffeners and hazard stripes, three hinges, large handwheel, 'B-04' plate. (Look only — no rating.)
  • Hatch FloorFlush floor hatch for a 1.0 m opening: chequer-plate leaf, recessed lift handle, support ledges, hinges along one edge.
  • Hatch ScuttleRound deck scuttle for a 0.8 m opening: raised coaming ring, round lid with handwheel and gasket, hinged on one side.
  • Frame P1Empty steel frame (cased opening) for a P1 opening: lining, architraves both faces, jamb kick plates.
  • Frame P2Empty steel frame for a P2 (double) opening.
  • Frame V1Heavy galvanised frame for a V1 vehicle opening with hazard-striped impact posts on both sides.
  • Frame BulkheadEmpty bulkhead frame: rounded opening with coaming in a P1 opening (a passage without a door).
  • Frame InfillWelded steel infill plate closing a P1 opening, with stiffeners, weld beads and a red 'CLOSED' sign.
  • Fixture BeaconWall-mounted amber warning beacon on a bracket (emissive lens).
  • Fixture ControlStationWall-mounted push-button station (open / stop / close, key switch, status lamp) for shutters and sliding doors.
  • Fixture AccessReaderWall-mounted access reader with keypad, reader window and red / green LEDs.
  • Guard BollardFloor-fixed impact bollard (Ø114 mm, 1.1 m) with yellow and black bands and a bolted base plate.
  • Guard JambGuardHazard-striped steel corner guard (L angle, 1.0 m) for an outside wall corner.

Technical details

Formats and specifications

  • Formats: GLB (glTF 2.0, embedded PBR textures), FBX, Blender 5.0 .blend, Unity 6 package (Built-in + URP)
  • Real-world scale in metres
  • 240 – 4,304 triangles per asset (42,740 for all 23)
  • PBR textures 512 – 4096 px: BaseColor, Normal (OpenGL), ORM, Unity-style MetallicSmoothness, Emission for lamps
  • Collision: 93 simple box colliders as UCX_ meshes in FBX and separate collision GLBs
  • Validated: Khronos glTF validator 0 errors / 0 warnings; Blender re-import of every format with textures

Compatibility

Tested engines and known limits

  • Blender: tested (native files; GLB/FBX re-import with textures).
  • Unity 6: tested in Unity 6000.6.5f1 (Built-in Render Pipeline and URP 17.6.0) — prefabs with convex MeshColliders, OPENING_ markers and moving parts with their pivots, all demo scenes with wall blocks, every part opened by the included editor helper and compared with the Blender pose, and a CharacterController walking through every wall unit open and closed (Built-in 60/60, URP 60/60 door checks; 4/4 / 4/4 bollard walks).
  • Unreal Engine, Godot, HDRP and other engines: not tested. GLB and FBX are standard formats and the FBX files carry Unreal-style UCX_ collision meshes, but no engine-specific setup is provided.

Known limitations

  • No animation clips or door scripts: parts are ready to move, but opening them in a game is up to you.
  • Roller-shutter curtains open by scaling into the housing (no rolling drum); vision panels are opaque dark glass.
  • Five fixed opening sizes in 0.2 m walls and floors. No LODs.
  • Plausible proportions for games and visualisation — not engineered to any building, fire, security, marine or blast standard; "watertight" and "blast" describe the look and carry no rating.

Need a kit like this built to your spec?

We can extend the Doors & Bulkheads Kit standards with new pieces, or build a new kit for your setting, scale and engine.

More projects

Maintenance corridor demo layout, atmospheric lighting

Utility Corridor Kit

Straight runs, turns, junctions and dead ends from one small set of pieces on a 3 m grid.

Structures 21 assets
Pump Room demo layout, atmospheric lighting

Industrial Pipework Kit

Build industrial pipe runs in minutes: every piece snaps to the next through one shared port standard.

Building services 19 assets