Logistics · Portfolio project 07

Warehouse Loading Dock Kit

Modular Dock Bays, Levellers, Shelters, Bumpers, Restraints & Yard Gear

Build the truck side of a warehouse: dock bays that join on a 4.5 m pitch, levellers that drop into their pits, and seals, shelters, bumpers, lights and restraints that snap onto their own mounts.

Assets
19 · 9 functional types
Formats
GLB · FBX · .blend · Unity 6
Tested in
Unity 6000.6 (Built-in, URP) · Blender 5.0
Version
1.0.0 · 95 release checks passed

Blender renders of the kit's demo layouts. Walls, floors and plain context blocks in the images are scene dressing for the demos.

What was built

The truck side of a warehouse for games: dock bays with a vertical-lift sectional door, blank, stair and end bays, hydraulic and telescopic pit levellers, a curtain shelter and a foam dock seal, laminated, steel-faced and roller bumpers, a swing-arm dock light and a red / green driver signal, a hook vehicle restraint, a bay canopy, wheel guides, a wheel chock, a trailer stand and a portable dock plate. Every bay joint, pit and wall mount is a checked port on a 4.5 m bay pitch — PBR materials and game-ready exports.

Where it is useful

Warehouse exteriors, distribution centres and yard spaces built bay by bay along the truck side of a building.

Demo layouts

Two demo scenes — a dock front (a run of six bays placed from the first bay only: a blank bay, three door bays with hydraulic and telescopic levellers, curtain shelters and a foam seal, three kinds of bumper, driver signals, dock lights, hook restraints and canopies, a stair bay and an end bay; wheel guides, a wheel chock and a trailer stand in the yard) and a dock inside (two door bays from the warehouse floor with levellers flush with the dock floor, dock lights and a dock plate) — are included as a Blender file and as placement lists (Blender and Unity transforms) and as Unity scenes. The yard, warehouse floor, trailer and plain context blocks in the images are demo context and are not included.

Port standard

  • Dock bays: 4.5 m pitch; both ends of every bay carry the same section (1.2 m concrete dock, clad wall to 5.4 m), so door, blank, stair and end bays join in any order.
  • Leveller pit: a door bay's pit (2.0 × 2.5 × 0.6 m) takes either leveller; the deck lands flush with the dock floor and 20 mm clear of the pit walls.
  • Face mounts: the door bay has a mount for a shelter or seal, two bumpers, a driver signal, a dock light (inside), a restraint and a canopy; each device sits flat on its face with nothing behind it.
  • Every port (position, direction, up axis, family, role) is listed in asset_manifest.json and in PortStandard.md; Unity prefabs carry PORT_ marker objects and an editor snap command.
  • The demo scenes were assembled from the exported files using only that port data and checked: 37 joints coincide exactly and touch, no unintended overlaps; each dock run is placed from its first bay only and every bay lands exactly on the yard.

Contents

What's in the kit (19 assets, 9 functional types)

  • Bay DoorDoor bay, 4.5 m: concrete dock (1.2 m high, 3.0 m deep) with a leveller pit (2.0 × 2.5 × 0.6 m) and curb angles, clad wall to 5.4 m with a 3.0 × 3.0 m opening, vertical-lift sectional door with vision panels behind it, tracks, spring shaft and cable drums inside; seven face mounts.
  • Bay BlankBlank bay, 4.5 m: concrete dock and clad wall with panel seams, coping, dock edge angle and a downpipe.
  • Bay StairStair bay, 4.5 m: concrete dock and clad wall with a personnel door, an external steel stair (seven risers) to a grated landing with a yellow handrail.
  • Bay EndEnd bay, 4.5 m: closes a dock run (one end port) with the building's side wall returning inwards and a striped corner guard.
  • Leveller HydraulicHydraulic pit leveller: chequered deck flush with the dock floor, deck beams, two hydraulic cylinders, striped toe guards, hinged lip hanging in its keepers, maintenance strut.
  • Leveller TelescopicTelescopic pit leveller: chequered deck flush with the dock floor, front header with a retracted ribbed telescopic lip on two guides, cylinders, striped toe guards.
  • Shelter CurtainCurtain dock shelter: 3.6 m wide head box and side frames 0.9 m deep, slit side and head curtains with yellow guide strips, fascia band.
  • Shelter SealFoam dock seal: head and side pads 0.3 m deep with dark wear covers, yellow guide stripes and backer boards.
  • Bumper LaminatedLaminated dock bumper, 0.25 × 0.45 m: stacked rubber pads on two rods in a bolted angle frame.
  • Bumper SteelFacedSteel-faced dock bumper: rubber block with a bolted steel face plate and a striped band.
  • Bumper RollerRoller dock bumper: a vertical rubber roller on a pin between two bracket plates.
  • Light DockLightSwing-arm dock light (inside wall): wall plate, swivel, two-part yellow arm with elbow, lamp head with guard bars.
  • Light SignalDriver signal (outside wall): red and green lamps with visors in a black housing on a wall plate.
  • Restraint HookHook vehicle restraint (dock face): wall plate, two track channels, striped carriage housing, red rotating hook, amber status lamp.
  • Canopy CanopyBay canopy: wall rail, four cantilever arms, sloping ribbed roof sheet 1.4 m deep with a fascia, above the shelter.
  • Yard WheelGuideWheel guide, 3.0 m: twin yellow rails on four bolted posts; the entry end ramps down to the yard.
  • Yard WheelChockWheel chock: rubber wedge with base ribs, striped face and a handle.
  • Yard TrailerStandTrailer stand: yellow frame on a base plate, screw-jack head with crank, two wheels and a handle.
  • Plate DockPlatePortable dock plate, 1.5 × 0.9 m: aluminium plate with traction ribs, sloped front lip, two locking legs and two handles.

Technical details

Formats and specifications

  • Formats: GLB (glTF 2.0, embedded PBR textures), FBX, Blender 5.0 .blend, Unity 6 package (Built-in + URP)
  • Real-world scale in metres
  • 172 – 1,272 triangles per asset (8,220 for all 19)
  • PBR textures 512 – 4096 px: BaseColor, Normal (OpenGL), ORM, Unity-style MetallicSmoothness, Emission for displays and lamps
  • Collision: 38 simple box colliders as UCX_ meshes in FBX and separate collision GLBs
  • Validated: Khronos glTF validator 0 errors / 0 warnings; Blender re-import of every format with textures

Compatibility

Tested engines and known limits

  • Blender: tested (native files; GLB/FBX re-import with textures).
  • Unity 6: tested in Unity 6000.6.5f1 (Built-in Render Pipeline and URP 17.6.0) — prefabs with convex MeshColliders and PORT_ markers, the two demo scenes, every demo joint re-checked in Unity (Built-in 69/69, URP 69/69 port checks), the port snap helper, and CharacterController walks through the scenes (Built-in 5/5, URP 5/5).
  • Unreal Engine, Godot, HDRP and other engines: not tested. GLB and FBX are standard formats and the FBX files carry Unreal-style UCX_ collision meshes, but no engine-specific setup is provided.

Known limitations

  • Static meshes and colliders only: the door is closed, leveller lips are stored, the restraint hook is stowed; no door, leveller or signal logic.
  • One bay size, door opening and pit; straight, level runs (no corner bays); the warehouse beyond the dock depth is not included. No LODs.
  • Plausible proportions for games and visualisation — not designed or tested to any dock, door, leveller, restraint or safety standard and carries no load or other ratings. Lights are props; signs carry no text.

Need a kit like this built to your spec?

We can extend the Warehouse Loading Dock Kit standards with new pieces, or build a new kit for your setting, scale and engine.

More projects

Goods Lift demo layout, atmospheric lighting

Cargo Elevator & Hoist Kit

Build goods lifts storey by storey and monorail hoists bay by bay: shaft segments that stack with their guide rails lined up, cars and gates on their own ports, runway sections that hang from their supports and carry trolleys and hoists.

Logistics 20 assets
Maintenance corridor demo layout, atmospheric lighting

Utility Corridor Kit

Straight runs, turns, junctions and dead ends from one small set of pieces on a 3 m grid.

Structures 21 assets